2 pole surge protective device type II
රු5,450.00
Specification
- SPD classification according to EN61643-11: Type 1+2
- SPD classification according to IEC61643-11: Class II
- Max. continuous operating a.c. voltage (L-N) Uc: 275V
- Max. continuous operating a.c. voltage (N-PE) Uc: 255V
- Lightning impulse current (10/350p s) limp: 12.5kA
- Norminal discharge current (8/20 p s) In: 20kA
- Max. discharge current (8/20 y s) (L-N) Imax: 50kA
- Max. discharge current (8/20 p s) (N-PE) Imax: 80kA
- Voltage protection level Up: ≤1.3kV
- Voltage protection level 5kA Up: ≤1.1kV
- Max. backup fuse: 160A gL
- Response time tA: ≤25nx
- Operating temperature range Tu: -40℃-80℃
- Operating state/fault indication: green/red
- Cross-section area (Min.): 6 mm²
- Cross-section area(Max.): 35mm²
- For mounting on: 35mm Din rail
- Enclosure material: Thermalplastic UL94-V0
- Degree of protection: IP20
Specification
- SPD classification according to EN61643-11: Type 1+2
- SPD classification according to IEC61643-11: Class II
- Max. continuous operating a.c. voltage (L-N) Uc: 275V
- Max. continuous operating a.c. voltage (N-PE) Uc: 255V
- Lightning impulse current (10/350p s) limp: 12.5kA
- Norminal discharge current (8/20 p s) In: 20kA
- Max. discharge current (8/20 y s) (L-N) Imax: 50kA
- Max. discharge current (8/20 p s) (N-PE) Imax: 80kA
- Voltage protection level Up: ≤1.3kV
- Voltage protection level 5kA Up: ≤1.1kV
- Max. backup fuse: 160A gL
- Response time tA: ≤25nx
- Operating temperature range Tu: -40℃-80℃
- Operating state/fault indication: green/red
- Cross-section area (Min.): 6 mm²
- Cross-section area(Max.): 35mm²
- For mounting on: 35mm Din rail
- Enclosure material: Thermalplastic UL94-V0
- Degree of protection: IP20
Specification
- SPD classification according to EN61643-11: Type 1+2
- SPD classification according to IEC61643-11: Class II
- Max. continuous operating a.c. voltage (L-N) Uc: 275V
- Max. continuous operating a.c. voltage (N-PE) Uc: 255V
- Lightning impulse current (10/350p s) limp: 12.5kA
- Norminal discharge current (8/20 p s) In: 20kA
- Max. discharge current (8/20 y s) (L-N) Imax: 50kA
- Max. discharge current (8/20 p s) (N-PE) Imax: 80kA
- Voltage protection level Up: ≤1.3kV
- Voltage protection level 5kA Up: ≤1.1kV
- Max. backup fuse: 160A gL
- Response time tA: ≤25nx
- Operating temperature range Tu: -40℃-80℃
- Operating state/fault indication: green/red
- Cross-section area (Min.): 6 mm²
- Cross-section area(Max.): 35mm²
- For mounting on: 35mm Din rail
- Enclosure material: Thermalplastic UL94-V0
- Degree of protection: IP20
Related Products
WIFI Repeater Basic
රු5,650.00
Compare
- Input Voltage: AC 100-240V
- Signal Rate: 2.4GHz 300Mbps
- Interface: RJ45 port ( 10 / 100mbps )
- Encryption Type: WPA2-PSK, WPA, WPA3-
- Personal Life: ≥ 20000 hours
- Antenna: Embedded Antenna
- Power Plug Type: EU / US / UK
- Wi-Fi Network: 802.11 b/g/n, 2.4GHz
- Working Temperature: -20℃~+45″C
Multi-Pole Smart Circuit Breaker WIFI
රු27,500.00 – රු32,250.00
- Standards Compliant: GB/T 10963.1、NB/T42149、IEC 60898-1
- Rated Voltage: AC 220V( 1P、2P)/AC 400V( 3P、4P) 50Hz / 60Hz
- Number of poles: 1P, 4P
- Rated current: 63A
- Mechanical Life: GB 10963.1 comply, ≥10000 times
- Electrical life：GB 10963.1 comply, ≥6000 times
- Working Temp: -25℃ ~ +62℃
- Control Mode: Working Mode, Pairing Mode
- Phase Leakage Current: Each phase cost steady state current less than 0.2mA
- Drop Test: GB/T4857.18 comply
- EMC Test:GB/T18499-2008 comply
Available on backorder
Smart ZigBee Gateway square v1
රු9,500.00
Compare
- The gateway to connect the WiFi firstly, then add Zigbee lamps through “TUYA SMART” APP—-Also can add other Tuya smart devices.
- Can connect up to 128 devices at the same time.
- After the lamp / device be added into APP successfully
- Lamp could be remote control via app, also support timing & grouping & sharing with Family, have memory function.
- Lamp / device support voice control via Tmall Genie, Xiaodu, Xiaoai, Alexa, Google Home, Echo, Yandex etc Smart Speakers.
Reviews
There are no reviews yet.